Skip to main content
RealCostIQ

2026 local estimate · updated 2026-07-22

Cost to remodel a kitchen in Tulsa, OK

A typical kitchen remodel in the Tulsa, OK area runs $63,655, with most projects landing between $9,094 and $118,216 — about 9% below the national average.

Low

$9,094

Basic materials, simple job

Labor$2,594
Materials$6,500

Typical

$63,655

What most people pay

Labor$18,155
Materials$45,500

High

$118,216

Premium materials or complex job

Labor$33,716
Materials$84,500

What's priced: Mid-range remodel of a typical kitchen — new cabinets, countertops, sink and fixtures — without moving walls or relocating plumbing. Excludes permits, structural repairs found mid-job, and premium upgrades.

Why Tulsa is cheaper than average

Almost entirely labor. Carpenters in the Tulsa, OK area earn about 26% less than the national mean for the same occupation, per Bureau of Labor Statistics wage data. Because kitchen remodel is roughly 35% labor, that difference flows straight into the total.

National typical ....... $70,000
Materials (65%) ... $45,500 (unchanged)
Labor (35%) × 0.741 ... $18,155
Tulsa, OK typical ... $63,655

Cabinets and countertops are the largest line items in a kitchen remodel and are bought rather than built on site, so materials carry most of the cost. Labor share rises on gut renovations that move plumbing or electrical, and falls on cabinet-and-counter refreshes.

Get a number for your own job

The figures above are for a standard project. Your size, materials, and access will move them. Run your own specification through the calculator, then apply the ×0.741 local labor factor to the labor portion.

Open the kitchen remodel calculator →

Permits for a kitchen remodel in Tulsa

Issuing authority: City of Tulsa Development Services / Permit Center

Tulsa's Permit Center states a goal of one-business-day issuance for a residential interior remodel permit. Under the building permit fee table, work valued up to $5,000 is $133, and $5,000.01 to $40,000 is $213; a separate declared valuation fee lists $64 for value up to $15,000, $98.50 up to $100,000, and $0.97 per $1,000 above that.

For valuation between $40,000 and $150,000, the building permit fee is $6.00 per thousand dollars of estimated valuation. The valuation excludes electrical, mechanical, and plumbing costs, which are covered by the individual licensed trade permits — the plumbing side, for instance, is a base fee of $81 covering the first fixture, plus $3.31 for each additional fixture, so your new kitchen sink adds to that line. Ask the Permit Center how the declared valuation fee and building permit fee apply to your remodel, and have your plumber itemize each fixture separately so the additional-fixture charge is calculated correctly.

Fees

Review time

Also published

Tulsa's fee figures are quoted from a FY2025 fee amendment dated May 2024 that was presented to the council for approval; the city's pages do not show whether it was adopted as written. Confirm with the permit office.

Quoted verbatim; not recalculated.

Rules set by the state of Oklahoma

Nearby metros

Compare kitchen remodel cost across every US metro we cover — the same labor-adjusted model as this page, ranked from most to least expensive, if you want the national picture rather than Tulsa alone.

How we calculate this

We take a national installed-cost range, split it into labor and materials, and scale only the labor half by this metro's actual wage data. That is the whole model — no black box, and reproducible from the figures on this page.

  • National range: $10,000–$130,000, from our kitchen remodel cost data (last verified 2026-07-13).
  • Labor share: 35%. An industry rule of thumb, not a measured value — the softest assumption here, which is why we state it rather than bury it.
  • Metro labor factor: ×0.741, being the mean annual wage for Carpenters in Tulsa, OK divided by the national mean for the same occupation.
  • Materials: held at the national level. We vary labor by metro and hold materials at the national level. That is deliberate: shingles, copper, HVAC equipment, and cabinets are nationally traded and priced, and what actually varies locally is freight and sales tax — both small next to the labor spread. We have no metro-level materials index we can defend, so rather than invent one, we vary only what we can source.

Wage source: U.S. Bureau of Labor Statistics — Occupational Employment and Wage Statistics (OEWS), metropolitan area estimates, May 2025. A U.S. Government work, in the public domain and free to reuse. Where BLS suppresses wage data for a metro, we publish no page for it rather than fill the gap with an estimate.

Educational estimate only. A real quote for your specific property beats any model, including ours — get at least three.

Related

Frequently asked questions

How much does it cost to remodel a kitchen in Tulsa, OK?+

A typical project in the Tulsa, OK area runs about $63,655, with most falling between $9,094 and $118,216. Of the typical figure, roughly $18,155 is labor and $45,500 is materials. That puts Tulsa about 9% below the national typical cost of $70,000.

Why is it cheaper to remodel a kitchen in Tulsa, OK than the national average?+

Almost entirely labor. Carpenters in the Tulsa, OK area earn about 26% less than the national average for the same occupation, according to Bureau of Labor Statistics wage data. Because kitchen remodel is roughly 35% labor, that wage difference flows through to the total. Materials are priced nationally and barely move between metros.

What's included in these Tulsa, OK estimates?+

Installed cost — materials plus labor for a standard project of this type. It does not include permits, which vary by municipality, structural repairs discovered mid-job, or premium upgrades. The range reflects genuine variation in scope and material grade, not uncertainty about the metro. Always get at least three local quotes before budgeting; a real quote for your specific property will beat any estimate, including ours.

How is this different from a national average with the city name swapped in?+

We split the national installed cost into labor and materials, then scale only the labor half using the actual mean wage for Carpenters in this specific metro area, published by the Bureau of Labor Statistics. Materials stay at the national level because we have no defensible metro-level materials index — shingles and HVAC equipment are nationally traded, and only freight and sales tax really vary. Where BLS suppresses wage data for a metro, we do not publish a page for it at all rather than fill the gap with a guess.